API BFJI BOLTED FLANGE JOINT INSPECTOR · PUBLICATION

ASME PCC-2 in the API BFJI Bolted Flange Joint Inspector exam

Repair of Pressure Equipment and Piping. Our API BFJI Bolted Flange Joint Inspector bank draws 161 of its 999 questions from this publication — 16% — and they cite 28 different clauses. The clause list below is counted from those questions, not copied from a syllabus.

Clauses the questions cite

All 28, in document order. The number is how many questions in our bank reference that clause.

2.2 · 33.1 · 13.2.1 · 23.3 · 63.3.1 · 23.3.2 · 53.3.3 · 13.4 · 23.4.1 · 43.4.2 · 13.4.3 · 13.5 · 23.6 · 24.1 · 14.1.6 · 24.2.1 · 24.2.2 · 34.2.4 · 14.2.5 · 14.2.6 · 24.2.7 · 14.2.8 · 14.5 · 35.1 · 15.2 · 26.1 · 126.3 · 66.3.1 · 12

Free sample question from ASME PCC-2

Per ASME PCC-2, how is a spiral wound gasket fitted with a centering ring classified for hot and half bolting purposes?
- A. As unconfined
- B. As a soft gasket, because the windings compress more than one millimetre during assembly
- C. As a hard faced gasket, because the winding metal contacts the flange seating surface directly
- D. As a special gasket, requiring separate consideration in the job specific procedure prepared
- E. As a confined gasket ✓
Confinement matters because it governs blowout potential when the joint is partly unloaded. The centering ring physically restrains the sealing element from being expelled. ASME PCC-2, Article 311, 311-3.1

All free API BFJI Bolted Flange Joint Inspector questions

Other publications in this exam

ASME PCC 1 · 403

999 API BFJI Bolted Flange Joint Inspector questions

Counts are from AssetronX’s own question bank and describe what we have written, not what the exam contains. AssetronX is an independent examination-preparation provider and is not affiliated with, endorsed by or accredited by any certifying body or standards organisation. The clause numbers refer to the publications’ own paragraphs; the publications themselves are not reproduced here.