API SIRE - SOURCE INSPECTOR ROTATING EQUIPMENT · PUBLICATION
ASME IX in the API SIRE - Source Inspector Rotating Equipment exam
Qualification Standard for Welding, Brazing, and Fusing Procedures. Our API SIRE - Source Inspector Rotating Equipment bank draws 118 of its 1,573 questions from this publication — 8% — and they cite 49 different clauses. The clause list below is counted from those questions, not copied from a syllabus.
Clauses the questions cite
The 40 most cited of 49, in document order. The number is how many questions in our bank reference that clause.
Free sample question from ASME IX
A welder passes the required groove weld test under ASME Section IX. What fillet welding qualification follows?
- A. Only the size tested
- B. Fillet welds in the thicknesses tested only, with larger sizes requiring a separate fillet weld test
- C. Fillet welds on pipe of 2 7/8 in. outside diameter and over, but not on smaller diameters
- D. Fillet welding at any thickness, on pipe of any diameter ✓
- E. No fillet weld qualification, since groove and fillet performance qualifications are entirely separate
Passing the groove test carries fillet welding with it -- any thickness, any pipe diameter -- bounded only by the essential variables in QW-350 or QW-360. ASME BPVC Section IX, QW-303.1
All free API SIRE - Source Inspector Rotating Equipment questions
Other publications in this exam
Counts are from AssetronX’s own question bank and describe what we have written, not what the exam contains. AssetronX is an independent examination-preparation provider and is not affiliated with, endorsed by or accredited by any certifying body or standards organisation. The clause numbers refer to the publications’ own paragraphs; the publications themselves are not reproduced here.