ASNT LIQUID PENETRANT TESTING - LEVEL III · PUBLICATION

ASTM.E165 in the ASNT Liquid Penetrant Testing - Level III exam

ASTM E165 E165M Standard Practice for Liquid Penetrant Testing. Our ASNT Liquid Penetrant Testing - Level III bank draws 71 of its 756 questions from this publication — 9% — and they cite 39 different clauses. The clause list below is counted from those questions, not copied from a syllabus.

Clauses the questions cite

All 39, in document order. The number is how many questions in our bank reference that clause.

1.1 · 21.2 · 21.2.2 · 31.3 · 11.4 · 12.1.1 · 12.3 · 12.3.1 · 12.5.1.1 · 12.7.7 · 13.1.1 · 13.1.2 · 14.1 · 44.2.3 · 16.1 · 17.1 · 17.3 · 17.5 · 18.2 · 48.3.1 · 28.4.1 · 18.6.1.1 · 18.6.3.3 · 38.7.1 · 18.8.2 · 28.8.3 · 28.8.4 · 68.9.1.1 · 18.9.2 · 18.9.4 · 18.10 · 29.1 · 29.1.1 · 39.1.2 · 49.2 · 110.1 · 110.2 · 110.2.1 · 110.3 · 1

Free sample question from ASTM.E165

Why should developer be taken off parts promptly once the examination is finished?
- A. To keep the ambient light reading below 2 fc
- B. Because it becomes harder to remove the longer it stays on the part ✓
- C. To restore the fluorescent brightness
- D. Because the developer will otherwise absorb moisture and change the concentration of the aqueous developer bath at the next station
- E. To recover the developer powder for reuse
Delay lets the coating bond to the surface, which turns a simple rinse into a much harder cleaning job. ASTM E165 Section 8.10

All free ASNT Liquid Penetrant Testing - Level III questions

Other publications in this exam

ASTM E1417 · 197 ASME V · 99

756 ASNT Liquid Penetrant Testing - Level III questions

Counts are from AssetronX’s own question bank and describe what we have written, not what the exam contains. AssetronX is an independent examination-preparation provider and is not affiliated with, endorsed by or accredited by any certifying body or standards organisation. The clause numbers refer to the publications’ own paragraphs; the publications themselves are not reproduced here.