AMPP REFINING CORROSION TECHNOLOGIST (NACE RCT) · PUBLICATION
NACE SP0472 in the AMPP Refining Corrosion Technologist (NACE RCT) exam
NACE SP0472 - Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldment in Corrosive Petroleum Refining Environments. Our AMPP Refining Corrosion Technologist (NACE RCT) bank draws 49 of its 6,888 questions from this publication — 1% — and they cite 28 different clauses. The clause list below is counted from those questions, not copied from a syllabus.
Clauses the questions cite
All 28, in document order. The number is how many questions in our bank reference that clause.
What they ask about
Free sample question from NACE SP0472
What does SP0472 require once this is found?
- A. Report it to the user, then remove and reweld, heat treatment not being an acceptable remedy
- B. Remove and reweld immediately, informing the user once the corrective work is complete
- C. Accept it if the heat affected zone hardness is within limits, since the deposit governs only
- D. Report it to the user, then remove and reweld or heat treat, with approval first ✓
- E. Apply local postweld heat treatment without approval, then retest the affected weld deposit
Approval before action, not after. Whichever route is taken the weld gets retested to confirm the correction worked, and additional welds should be tested for each hard one found, at a rate the user decides. SP0472, 2.2.7.8
All free AMPP Refining Corrosion Technologist (NACE RCT) questions
Other publications in this exam
Counts are from AssetronX’s own question bank and describe what we have written, not what the exam contains. AssetronX is an independent examination-preparation provider and is not affiliated with, endorsed by or accredited by any certifying body or standards organisation. The clause numbers refer to the publications’ own paragraphs; the publications themselves are not reproduced here.

