AssetronXAssetronX

ASNT MAGNETIC PARTICLE TESTING - LEVEL III · PUBLICATION

ASTM.E709 in the ASNT Magnetic Particle Testing - Level III exam

ASTM E709 Standard Guide for Magnetic Particle Testing. Our ASNT Magnetic Particle Testing - Level III bank draws 148 of its 804 questions from this publication — 18% — and they cite 61 different clauses. The clause list below is counted from those questions, not copied from a syllabus.

Clauses the questions cite

The 40 most cited of 61, in document order. The number is how many questions in our bank reference that clause.

1.1.1 · 11.2.1 · 11.2.7.4 · 21.3 · 41.5 · 11.7 · 12.1 · 12.1.1 · 12.1.3 · 13.1 · 33.2.1.1 · 63.2.1.2 · 23.2.2 · 13.2.2.1 · 63.2.2.2 · 23.2.2.3 · 33.2.2.4 · 26.3.1 · 16.6 · 17.1.1.1 · 17.2 · 37.3 · 18.1.1 · 18.2.6 · 18.3.1 · 18.4 · 18.5.1 · 19.1.1 · 110.1.1.1 · 110.1.1.2 · 110.1.3.1 · 211.1.1 · 111.1.3 · 111.1.5 · 112.3.2.1 · 212.3.2.3 · 112.3.3.2 · 212.3.3.4 · 113.6 · 413.7.1 · 2

What they ask about

Sensitivity Studies and POD - M1-E709-SENS 20

Free sample question from ASTM.E709

  1. A draft procedure submitted for your Level III approval specifies prod magnetization on the finish-machined bore of an aerospace actuator housing. Considering ASTM E709 guidance, what disposition is most appropriate?

    • A. Approve it, provided the prod tips are solid copper
    • B. Remove the prod technique and require a non-contact approach such as a yoke or coil ✓
    • C. Approve it on condition that a wet fluorescent bath is applied at the contact points to suppress heating
    • D. Approve it if the open-circuit voltage is limited to 25 volts
    • E. Approve it with unrectified AC so only surface flaws respond

    E709 warns that prods can arc and cause metallurgical damage and that they are inappropriate for machined surfaces and aerospace hardware, so a magnetization approach that makes no electrical contact must be substituted. ASTM E709 Section 12.3.2.1

All free ASNT Magnetic Particle Testing - Level III questions

Other publications in this exam

ASTM E1444 · 128ASME V · 59ISO 9934 3 · 25
804 ASNT Magnetic Particle Testing - Level III questions

Counts are from AssetronX’s own question bank and describe what we have written, not what the exam contains. AssetronX is an independent examination-preparation provider and is not affiliated with, endorsed by or accredited by any certifying body or standards organisation. The clause numbers refer to the publications’ own paragraphs; the publications themselves are not reproduced here.